Household & Vehicle Assets

.

Vacuum Suction Magnetic Phone Holder with 360° Adjustment

Keep your phone conveniently positioned with the VNSPORT Vacuum Suction Magnetic Phone Holder. Combining a four-layer nano-gel suction base, a twist-to-lock vacuum mechanism, and a magnetic phone attachment, this adjustable mount offers flexible positioning in your car or on suitable surfaces at home.

Twist-to-Lock Vacuum Suction Base

Place the base on a clean, smooth, flat, non-porous surface and twist the dial to engage the vacuum seal. The nano-gel contact layer helps the base grip compatible surfaces. Always check that the mount is secure before attaching your phone.

Magnetic Attachment with 24 N55 Magnets

The magnetic head contains 24 N55 magnets for convenient phone attachment and removal. It is designed for compatible magnetic phones and cases, with two adhesive metal rings included for suitable non-magnetic phones or cases.

360° Adjustable Viewing Angle

The rotating zinc-alloy arm lets you adjust your phone’s position for portrait or landscape viewing. Set your preferred angle for navigation before driving, or reposition the holder for hands-free use at home.

For Your Car, Desk & More

Use the holder on suitable glass, mirrors, polished stone, and other smooth, flat surfaces. Dashboard compatibility depends on the material, texture, and condition. Textured, porous, curved, or delicate surfaces may not provide a reliable seal or may be unsuitable for the nano-gel base.

Foldable Design for Convenient Storage

The collapsible arm folds down for easier storage and portability. Move the holder between suitable locations for tasks such as following a recipe, making a video call, or recording content while stationary.

Reusable Nano-Gel Base

If dust reduces adhesion, rinse the suction contact surface with water and allow it to air-dry completely before reattaching. Keep the magnetic head and moving components dry, and inspect the base before each use.

Phone & Case Compatibility

The magnetic attachment is intended for compatible MagSafe-equipped iPhones and MagSafe-compatible cases, including supported models within the iPhone 12–17 series. Other phones, including Android devices, may require one of the included adhesive metal rings. Fit and holding performance depend on the phone’s weight, case material, and ring placement.

When using an adhesive ring, apply it to a suitable clean, flat surface and allow the adhesive to bond for 24 hours before use. Check compatibility with your phone’s wireless charging setup before attaching a metal ring.

Product Details

• Product type: Vacuum suction magnetic phone holder
• Base: Four-layer nano-gel suction design
• Locking mechanism: Rotary vacuum seal
• Magnetic head: 24 N55 magnets
• Arm material: Zinc alloy
• Adjustment: 360° rotation
• Storage: Foldable design
• Included accessories: Two adhesive metal rings
• Adhesive ring bonding time: 24 hours before use

Frequently Asked Questions

How do I install the suction base?

Choose a suitable smooth, flat, non-porous surface. Clean and dry it, position the base, and twist the dial to engage the vacuum seal. Check the attachment before placing your phone on the mount and follow the supplied installation instructions.

Will it stick to every dashboard?

No. Dashboard materials and textures vary. Rough, curved, porous, coated, or delicate surfaces may not hold the seal reliably or may be unsuitable for adhesive contact. Check your vehicle’s care guidance before installation.

Do I need a metal ring for my phone?

A compatible MagSafe phone or case may attach directly. Non-magnetic phones and cases generally require one of the included adhesive rings. Case thickness, surface material, and device weight can affect the hold.

Does this mount wirelessly charge my phone?

No wireless charging function is specified. The magnetic head holds your phone; it should not be treated as a wireless charger.

Can I rotate my phone between portrait and landscape?

Yes. The adjustable design supports different viewing angles and orientations. Make adjustments while parked and check that the phone remains securely attached.

What should I do if the suction grip weakens?

Remove the mount according to its instructions and inspect the contact surface. If it is dusty, rinse the nano-gel contact surface with water and let it air-dry completely. Reinstall it on a suitable clean surface and check the seal before use.

Can I mount it behind a Tesla Model Y display?

Fit depends on the available surface, clearance, and installation position. Do not assume compatibility across all Model Y versions. Confirm that the mount can attach securely without contacting the display or obstructing controls.

Placement & Use

Choose a position that does not obstruct your view, airbags, or vehicle controls. Check the suction base and magnetic attachment regularly, especially after temperature changes or repositioning. Set up navigation before driving and use filming features only while safely parked.

Extra Large Car Drying Towel for Efficient After-Wash Care

Dry your vehicle after washing with the VNSPORT Extra Large Car Drying Towel. Measuring 2 ft × 3 ft, this absorbent towel covers broad surfaces to help you collect remaining water with fewer passes and less towel switching.

VN-Loop Technology for Water Pickup

The towel’s VN-Loop design helps collect water as you move it across a freshly washed surface. Use it to lift remaining droplets before they air-dry, helping reduce water spots and streaks during your drying routine.

Large 24 × 36-Inch Coverage

The generous size makes it convenient to work across larger areas such as the hood, roof, and doors. Fold the towel for smaller sections and to expose a clean drying surface as you move around the vehicle.

Absorbent Design for Fewer Towel Changes

Designed to hold water as you dry, this car drying towel helps make your after-wash routine more efficient. The number of towels needed depends on your vehicle’s size, how much water remains, and how saturated the towel becomes.

For Coated & Uncoated Vehicles

A ceramic coating is not required to use this towel. It can be part of a drying routine for both coated and uncoated vehicles. Follow any care guidance provided for your vehicle’s finish or protective coating.

Simple Tips for Better Drying

Start with a thoroughly washed and rinsed vehicle and a clean towel. Work gently across the surface without heavy pressure. Check the towel regularly for dirt or debris, and switch to a clean towel if needed. Avoid using the same towel on dirty wheels and painted panels.

Product Details

• Product type: Extra large car drying towel
• Size: 2 ft × 3 ft / 24 × 36 inches
• Design: VN-Loop Technology
• Primary use: Drying freshly washed vehicles
• Suitable routine: After-wash care for coated and uncoated vehicles

Frequently Asked Questions

How large is the VNSPORT Car Drying Towel?

The towel measures 2 ft × 3 ft, equivalent to 24 × 36 inches. Its large surface area helps cover broad vehicle panels.

Can one towel dry my entire car?

It may be sufficient for some vehicles, but results depend on vehicle size, the amount of remaining water, and towel saturation. Keep a second clean towel available for larger vehicles or finishing touches.

Will it prevent all water spots?

Drying promptly helps reduce water spots caused by droplets drying on the surface. Results also depend on water mineral content, surface temperature, and drying technique. The towel does not remove existing mineral deposits.

Do I need a ceramic coating to use it?

No. A ceramic coating is not required. The towel can be used as part of an after-wash drying routine on coated or uncoated vehicles.

Can the towel scratch my paint?

No towel can guarantee scratch-free results in every situation. Dirt or grit trapped in a towel can mark a finish. Use a clean towel on a freshly washed surface, apply light pressure, and stop if the towel picks up debris.

How should I wash and dry the towel?

Follow the product’s care label for washing and drying instructions. Keep the towel separate from heavily soiled cleaning cloths and inspect it before each use.

Car Seat Gap Filler Strip for Everyday Convenience

Help keep phones, coins, and keys from slipping between your car seat and center console with the VNSPORT Car Seat Gap Filler Strip. This simple interior accessory fills the seat gap to help keep small essentials within reach and your car tidier.

Keep Small Items Out of the Seat Gap

Dropped items can be difficult to retrieve from narrow spaces beside your seat. This gap filler strip helps cover that opening, reducing the chance of everyday essentials falling into it.

Seatbelt-Friendly Design

Designed to fit alongside the seatbelt buckle, the strip helps cover the gap while keeping the buckle accessible. Check the fit after installation to ensure the seatbelt can fasten and release normally.

Durable & Leak-Resistant

Made for everyday use, the durable, leak-resistant design helps form a barrier along the seat gap. It is not a watertight seal, so clean up spills promptly.

A Tidier Car Interior

Keep the space beside your seat covered without adding a bulky storage accessory. This car seat gap filler offers a straightforward way to help prevent small items from disappearing between the seat and console.

Check Your Vehicle’s Fit

Seat gaps and buckle positions vary by vehicle. Before use, check that the strip fits securely without interfering with the seatbelt buckle, seat adjustment, or other vehicle controls.

Frequently Asked Questions

What does a car seat gap filler do?

It covers the space between the seat and center console to help prevent small items, such as phones, coins, and keys, from falling into the gap.

Will it fit every vehicle?

Fit depends on the width and shape of your seat gap and the position of your seatbelt buckle. Check your vehicle’s layout before purchasing.

Can I still use my seatbelt?

The strip has a seatbelt-friendly design intended to keep the buckle accessible. After fitting it, confirm that your seatbelt fastens and releases normally. Do not use the strip if it interferes with the seatbelt.

Does it provide extra storage?

This product is a gap filler strip, not a storage organizer. Its main purpose is to help stop small items from slipping between the seat and center console.

Is it waterproof?

The strip is described as leak-resistant, not waterproof. Do not rely on it to contain spills or protect components beneath the seat.

Wireless Car Adapter for Compatible Wired Smartphone Connections

Enjoy a cable-free connection between your smartphone and your car’s compatible infotainment system with the VNSPORT Wireless Car Adapter. With dual-band 2.4GHz/5GHz Wi-Fi and Bluetooth 5.0, this compact adapter converts a supported wired smartphone connection into a wireless setup for everyday driving.

Convert Your Existing Wired Connection to Wireless

Keep your phone connected without plugging it in for every trip. The adapter works with compatible vehicles that already support a wired smartphone connection through their infotainment system.

Simple Plug-and-Play Setup

Connect the adapter to your vehicle’s compatible USB data port and complete the initial phone pairing. After setup, the adapter is designed to reconnect automatically when your vehicle and infotainment system start.

Dual-Band Wi-Fi & Bluetooth 5.0

The adapter combines Bluetooth 5.0 for pairing with dual-band 2.4GHz/5GHz Wi-Fi for the wireless connection, helping you access supported smartphone features through your car’s display.

Navigation, Calls & Music Without the Cable

Access supported navigation, calling, and music features through your compatible infotainment system. Touchscreen and steering wheel controls remain available where supported by your vehicle, phone, and connected system.

Compact Design for Everyday Use

The small form factor fits neatly near your vehicle’s USB port without adding a bulky device to your dashboard setup.

Compatibility Information

This adapter requires an existing compatible wired smartphone interface. A USB port alone does not guarantee compatibility, and the adapter does not add a missing smartphone integration system to your vehicle. Confirm support for your vehicle’s head unit and phone before purchasing.

Frequently Asked Questions

What does this wireless car adapter do?

It converts a supported wired smartphone connection into a wireless connection, allowing you to use compatible infotainment features without connecting your phone by cable on every trip.

Will it work with any car that has a USB port?

No. Your vehicle must already have a compatible wired smartphone interface. A charging-only USB port is not sufficient.

Do I need to pair my phone every time?

Initial pairing is required. After setup, the adapter is designed to reconnect automatically when the vehicle’s infotainment system starts and your phone’s wireless connections are enabled.

Can I use navigation, calls, and music?

Yes, where these features are supported by your phone, vehicle, and connected infotainment system. Available apps and controls depend on that combination.

Can I still use my steering wheel controls?

Supported steering wheel and touchscreen controls can be used with the connected system. Availability varies by vehicle and infotainment setup.